How to Speed-up your PLDT Internet Browsing

Are you experiencing slow browsing or YouTube buffers a lot with your PLDT Internet?

Recently, I’ve found a solution online on how to speed-up your browsing with your PLDT internet. You don’t need to be a techy person to perform these simple steps and will only take you 30 seconds, that’s right! only 30 seconds and you will have faster browsing experience and less YouTube buffers.

Take note, these steps will not increase your subscribed speed with PLDT, it will only speed-up the loading time of your internet. For example, Facebook will load up faster, YouTube videos will play faster, or less lags when playing mobile games online. This trick is also applicable for Globe, Smart, or Sun WiFi users.

For advanced users or techies, you can just change your router DNS settings to “1.1.1.1” and “1.0.0.1“.

If you have any questions, just leave a comment down below. Please share if you find this article helpful.

For IOS device:

1. Open the “Settings” icon from the app menu , then look for “Wi-Fi“.

2. Tap the blue circle icon. Refer to screenshot below:

pldt-internet

2. Scroll down and look for “Configure DNS“.

pldt-internet

3. Change “Automatic” to “Manual” settings, then enter “1.1.1.1” and “1.0.0.1” under “DNS SERVERS“.

pldt-internet

4. Once done, tap the “Save” button and you’re done!

For Android device:

1. Go to your Wi-Fi settings, hold down your pldt wifi, then choose “Modify network” from the options.

pldt-internet

2. Under “Advanced options“, look for “IP settings“, then change “DHCP” to “Static“.

pldt-internet

3. Scroll down till you can see “DNS 1” and “DNS 2” boxes. Enter “1.1.1.1” and “1.0.0.1“.

pldt-internet

4. Once done, tap the “Save” button and you’re done!

For Windows PC device:

1. Right click the “Network” icon from the task bar, then choose “Open Network & Internet Settings“.pldt-internet

pldt-internet

2. Under “Settings” window, click on “Change adapter options”.pldt-internet

3. Right click on PLDT Wi-Fi icon, then click on “Properties” from the options.pldt-internet

4. Click on “Internet Protocol Version 4 (TCP/IPv4)“, then click on “Properties“.pldt-internet

5. Under “General” tab, select “Use the following DNS server Addresses“, then enter “1.1.1.1” and “1.0.0.1“.pldt-internet

6. Hit “Ok” button and you’re done!

Disclaimer:

YKN should not be held accountable for any issues that may arise after following these steps. Use it at your own risk.

Feel free to share this article...Share on Facebook
Facebook
Tweet about this on Twitter
Twitter
Share on Google+
Google+

Comments

  1. And… This works?

Speak Your Mind

*